- WINDOWS UPDATE CAUSING ISSUES WITH FINALE SOFTWARE DRIVER
- WINDOWS UPDATE CAUSING ISSUES WITH FINALE SOFTWARE PRO
I noticed other people experiencing the same problem in this forum, but for a different motherboard, although no resolution there yet.
WINDOWS UPDATE CAUSING ISSUES WITH FINALE SOFTWARE DRIVER
In Windows Event Viewer another error appears after a system reboot/restart: "The driver detected a controller error on \Device\RaidPort2.". Process command line: C:\Windows\System32\DriverStore\FileRepository\ias torvd.inf_amd64_815480839574a92b\RstMwService.exe" -> this seems important, but I'm not able to determine what this exactly means. During the Intel RST driver installation, the Windows Event Viewer generates the following warning: "The application \Device\HarddiskVolume3\Windows\System32\DriverSto re\FileRepository\iastorvd.inf_amd64_815480839574a 92b\RstMwService.exe with process id 3560 stopped the removal or ejection for the device PCI\VEN_8086&DEV_467F&SUBSYS_86941043&REV_00\3&115 83659&0&70. During that time I managed to update the firmware of both drives, but shortly after the secondary drive was ejected again. One time, after switching the drives in the motherboard M2 slots, the secondary drive (in M2_2) was actually active for a short while. I've also run self tests and used Samsung Magician for checking the health and performance. I've switched the drives multiple times and installed Windows on both of them. Both NVME SSD are technically working correctly. Intel_RST_Driver_Software_V19._WIN10_WIN11 _64-bit -> downloaded from ASUS (Z690-I) Product Support page SATA SSD: Samsung SSD 870 QVO 4TB -> not relevant here, but added for completeness
WINDOWS UPDATE CAUSING ISSUES WITH FINALE SOFTWARE PRO
NVME SSD #2: Samsung SSD 980 PRO 2TB -> connected to Chipset (on M2_2) -> problem M2 slot NVME SSD #1: Samsung SSD 980 PRO 2TB -> connected to CPU (on M2_1), boot drive Motherboard: ASUS ROG STRIX Z690-I GAMING WIFIĬPU: 12th Gen Intel(R) Core(TM) i5-12600K When the RST driver installation finishes, even before reboot, the drive is ejected again and unavailable in Disk Management again.
During that time I can copy files to it and the drive operates as normal. The weird thing is: when installing the Intel RST driver, at around 22% into the process, the secondary NVME SSD is detected by Windows 11 (a notification appears) and useable for a little while.
The drive is detected and visible in the BIOS, but does not show in Windows (or only for a very limited time). I recently purchased an Alder Lake system (ASUS Z690-I motherboard), but have problems with enabling the secondary NVME SSD (Samsung 980 PRO 2TB) in Windows 11.
0 kommentar(er)
